GC001 PCD cutting-material blank
Published product range- Grade
- GC001
- Grain size
- 1 µm
- Effective diameter
- 58 mm
CHINA / HENAN / SUPERHARD MATERIALS
Henan SFD Superhard Material Co., Ltd.
河南四方达超硬材料股份有限公司
Zhengzhou-based manufacturer publishing PCD materials and related tools for cutting, wire drawing and resource extraction. The selected grade files compare cutting-material blanks, not finished tools. Request the full blank specification and downstream cutting geometry before ordering.
Products & published specifications
3 detailed product filesSelect a family to see the source, dimensional range and questions to confirm. Images below identify product families. Read each caption for the source and illustration status.
Images are credited individually. Technical illustrations explain published dimensions; they are not factory photographs. Series photographs do not establish individual specifications.
| Grade | Grain size (µm) | Effective diameter (mm) | Published application lead |
|---|---|---|---|
| GC001 | 1 | 58 | Ultra-precision / high-gloss cutting |
| GS005 | 5 | 58 | Low-silicon aluminium, copper alloys, plastics |
| GA025 | 25 | 58 | Aluminium alloys with >14% silicon; composites |
Effective diameter comes from this grade table. Other pages discuss larger developed diameters; no 74 mm option is assigned to these grades without confirmation. PCD layer and total thickness are not stated.
Original comparison source ↗GS005 PCD cutting-material blank
Published product range- Grade
- GS005
- Grain size
- 5 µm
- Effective diameter
- 58 mm
GA025 PCD cutting-material blank
Published product range- Grade
- GA025
- Grain size
- 25 µm
- Effective diameter
- 58 mm
Product series in the official catalogue
PCD cutting-material grades
Selected GC001, GS005 and GA025 grades have different grain sizes and application guidance. Effective blank diameter is not a finished cutting-tool diameter.
Company publication ↗Other diamond materials and tools
The company profile separately lists drilling compacts, drawing dies and precision tools. Their specifications must be checked individually.
Company publication ↗Company facts
The following identity information is attributed to the company website. It does not replace registration or supplier approval checks.
| Field | Company-published information |
|---|---|
| Chinese entity | 河南四方达超硬材料股份有限公司 |
| History / listing | Established 1997; Shenzhen listing 2011, code 300179 (company-published) |
| Headquarters | 109 Tenth Avenue, Zhengzhou Area of Henan Pilot Free Trade Zone (Economic Development Zone), China |
| Manufacturing boundary | Headquarters address is not proof of the plant supplying a selected grade; confirm the producing site. |
| International sales | +86 371 66728026 (company-published) |
| Current source website | sf-diamond.com.cn; original candidate domain sfd.com.cn not established as this company’s website. |
Manufacturing & testing
The cutting-material page describes a PCD layer bonded to a cemented-carbide substrate using high-pressure, high-temperature sintering. Confirm grade composition and any subsequent cutting or grinding operations.
The quality page describes a testing centre and inspection controls, and names ISO9001, ISO14001 and ISO45001. Current certificate numbers, expiry dates and site scope have not been established.
The R&D page describes development of superhard materials and improved products. Agree a workpiece-specific trial and acceptance criteria; published application examples are not a guarantee of tool life.
Technical & quality documents
These are public-document leads. Current certificate validity and product applicability have not been independently established.
Grade and blank drawing
The selected online grade rows state grain size, effective diameter and application leads.
Before approval
Request current grade sheet, total and PCD-layer thickness, flatness, diameter tolerance and usable edge allowance.
Inspection and quality documents
The quality page describes inspection and management systems.
Before approval
Obtain current certificate copies with scope/site and lot-level dimensional/material inspection records.
Application trial
The catalogue differentiates grade application areas.
Before approval
Confirm workpiece alloy, silicon content, interrupted cutting, finish target, tool geometry and trial conditions.
What to confirm before an order
Buyer guidance from Honyawn Atlas — not a statement of the manufacturer’s commercial terms.
Blank or finished tool
Specify full-disc blank, cut segment or finished tool; attach a drawing and required edge preparation.
Material and operation
State alloy/composite, hardness, silicon content, operation, cutting conditions and surface-finish target.
Dimensional requirements
Confirm effective versus outside diameter, layer thickness, substrate, tolerance and edge allowance.
Order acceptance
Request sample quantity, traceability, MOQ, pricing, lead time, packing and producing entity.
Have a specification ready?
Include the drawing or standard, quantity per size and delivery destination. Select quotation, samples or technical documents in the request form.
Prepare a sourcing request →Sources & review record
Reviewed 2026-10-24. The publisher and document scope are identified below. Information is attributed to each publisher; no site visit or independent factory audit is claimed.
- Official company profile and headquarters ↗
Chinese identity, history, listed code, business range and Zhengzhou headquarters.
- PCD cutting-material grade table ↗
GC001 / GS005 / GA025 grain sizes, effective diameter and application guidance; thickness not stated.
- Quality assurance ↗
Company quality-management and inspection descriptions; certificates not independently validated.
- Research and development ↗
Company-published materials research and application-development description.